4HMEN -> TOECUTTER - DOOM KONTROL.

here are some clips of the four horsemen into the toecutter. heavy ain't it? I think I might like to put these both into one box.

FOUR HORSEMEN GUTS & V1 SCHEMATIC

here is a 4H i built up for a very patient member of FSB. I think it turned out pretty well! below that is the latest schematic with the output buffer added. click on the image or link to see them fully. such is the way when blogging from your phone!

I really kinda dig this layout, too. it gives the user the option of positioning the pedal vertically, with both jacks on one side(saving space), or horizontally, with top mounted jacks. the knobs on the front side keep them well out of the way of the stomping foot, which also leaves a nice canvas for whatever graphics might be used. sooner or later, I'll have to decide on a form factor and stick with it, but as of right now, every new pedal is a different challenge. I'm kind of looking forward to the day when I don't have to measure everything out for the new box, knobs, and layout I'm using, but it's definitely helping me get my chops up.

btw- I have since separated the battery wire from the input cable. even though it's shielded, and I heard no hum, I wanted to be sure, and it's just good practice.





HERE is a link to the latest schematic on freestompboxes.org.

FOUR HORSEMEN OVERDRIVE

well, i came up with another dirt pedal the other day.  lately, i've been experimenting with mixing different types of transistors together to achieve new tones, and this one kind of  takes that idea to the extreme.  it's designed under the premise that the stages increase in breakup as it goes along in the circuit, but instead of using stages that increase in gain, different types of transistors are used that exceedingly distort as the the circuit progresses.  for instance, the first gain stage is a silicon BJT.  this is used to get a decent push going and a very slight amount of drive.  next, is a MOSFET transistor, which like to distort a little easier, and in a bit more pleasing and richer way than the previous Si transistor.  finally, there is a germanium stage, which of course loves to distort in a very full and heavy overdrive, especially when driven by the previous gain stages.  the result is a very clear, yet complex crunch, that has a very nice character to it.  to round things out, in the beginning of the circuit is a JFET buffer, which helps to increase the current, and gives a nice high input impedance for the guitar pickup to see.  so in the end there is a total of 4 different types of transistors, each of which i tried to use to their optimum potential.  hence the name, the Four Horsemen Overdrive.

the tone control is a variation on the SWTC, but it has an added pole for a steeper rolloff.  the frequency point where the curve begins is rather high, so it is really more like a presence control- just taming the highest of frequencies, keeping the basic tone intact.

this circuit was spawned from a simpler design called the Nice Little Overdrive.  you can see the evolution in the thread over at FSB.

http://freestompboxes.org/viewtopic.php?f=28&t=11745

here is the schematic as it is in the latest version.

here is a pic of a vero layout that i built up.

and here is a quick video i made on my iphone.  the video is of the previous version without the high end rolloff presence control, and the bypass cap on the last stage, which adds a bit more gain.  the voice of the circuit is basically the same, but there is a little bit more flexibility.   of course the quality isn't the best, but you can get the idea!  ignore the man behind the camera.